Product


CT3

    • Double Built-in Spindle
    • Double Y-axis
    • Three Servo Turret

Total 48 Station Live Tooling

CT3 consists of three 16-position servo turrets that will dramatically upgrade machining efficiency and maximize productivity.

Built-in Type Spindle

The built-in spindle performing short accelerate/decelerate time and low vibration characteristic, it provide high precision and high efficient capability.

Oil Mist Lube System

The oil mist lube system provides lubrication oil for the gears in the turret,
that supply for reducing the mist continuously and lower the temperature of gear.

Specifications CT3-52Y2M CT3-76Y2M
Inquiry
Compare
Inquiry
Compare
Capacity
Controller Mitsubishi Mitsubishi / Fanuc
Max. manu. dia. ∅360 mm ∅360 mm
Standard manu. dia. ∅210 mm ∅210 mm
Swing over bed dia. ∅830 mm ∅830 mm
Distance between two center of spindle nose 1045 mm 1045 mm
Max. manu. length 310 mm 285 mm
Bar capacity ∅51 mm ∅76 mm
Axis specifications
B-axis aravel 775 mm 655 mm
Z1/Z2/Z3-axis travel 310 / 250 / 440 mm 252 / 250 / 382 mm
X1/X2/X3-axis travel 227.5 / 227.5 / 230 mm 227.5 / 227.5 / 230 mm
Y1/Y2-axis travel ±50 / ±50 mm ±50 / ±50 mm
X/Y/Z-axis motor 2.2 kw M: 2.2 kw
F: 2.7 kw
B-axis motor 2.2 kw M: 2.2 kw
F: 2.7 kw
X/Y/Z-axis rapid travel speed 16 / 6 / 40 m/min 16 / 6 / 40 m/min
B-axis rapid travel speed 40 m/min 40 m/min
Min. input unit 0.001 mm 0.001 mm
Spindle
Spindle bar capacity ∅51 mm ∅76 mm
Max. spindle speed 6000 rpm 4000 rpm
Spindle motor 7.5 / 11 kw M: 15 / 22 kw
F:18 / 22 kw
Center height 1188 mm 1188 mm
Spindle nose A2-5 A2-6
Chuck size 6" 8
Sub Spindle
Spindle bar capacity ∅51 mm ∅65 mm
Max. spindle speed 6000 rpm 4000 rpm
Spindle motor 7.5 / 11kw M: 7.5 / 11 kw
F:18 / 22 kw
Spindle nose A2-5 A2-6
Chuck size 6 8
L, R, C
Min. moving unit 0.001° 0.001°
C-axis rapid travel rate 600 min-1 600 min-1
Live tool turret
Turret station 16-station 16-station
Square tool □25 mm □25 mm
Round tool ∅25 mm ∅25 mm
Rotating mode Single Tool Transmission Single Tool Transmission
Live tool rpm 60~6000 min-1 60~6000 min-1
Live tool motor 3.7 / 5.5 kw M: 3.7 / 5.5 kw
F:4.5 kw
No. of live tool 16×3 16×3
Collet size ER∅32 ER∅32
Tool holder & tool size BMT65 BMT65
Hydraulic unit
Hydraulic motor 5HP / 3.7kw 5HP / 3.7kw
Coolant Pump
Spindle upper flush pump 1HP / 0.75kw 1HP / 0.75kw
Turret coolant pump 1HP / 0.75kw 1HP / 0.75kw
Chip flush pump 1HP / 0.75kw 1HP / 0.75kw
Sub-spindle internal coolant pump 1HP / 0.75kw 1HP / 0.75kw
Tank capacity
Tank capacity 48 L 48 L
Coolant tank 305 L 305 L
Machine
Power 220V / 93KVA M: 220V / 107KVA
F: 220V / 120KVA
Machine size(LxWxH) (includes chip conveyor) 4327x2335x2164 mm 4327x2335x2164 mm
Machine N.W.(includes chip conveyor) 11100 kg 11200 kg

※ M: Mitsubishi Controller  F: Fanuc Controller     ※ Design and specs subject to change without notice.


Optional
6" hydraulic chuck Axial and radial live tool holder Voltage stabilizer / transformer
Bar feeder 140 Bar high pressure coolant device Gantry System in CT Series
Robot System